Retention Pond #1
Set up project with no control points, work order and no design. Set up base on unknown, connect rover and perform no control point calibration, save base station location as a control point.
Retention Pond #2
Measure points for PDF orientation, import PDF Plan and georeferenced it.
Retention Pond #3
Measure edge of pavement to establish grades with break line, measure check point.
Retention Pond #4
COGO, free pick points along contour lines at set elevation, connect points with line. Offset the line for next contour, Free pick points for additional contour.
Retention Pond #5
COGO create line and boundary tap along the contour, more points along curves and fewer on straight. Set the line at proper elevation, then offset line command for more contours. Draw additional lines where offset doesn’t apply. Turn on 3d view and select measured surface to see progress.
Retention Pond #6
Overview progress so far. Add points to spot elevations as surface points. Create break line if needed.
Retention Pond #7
Review design and edit as needed. Press and hold and delete, the surface will update as we make changes. Save surface as design for use in collector or export to machine.
